How To Make A Sewing Table Insert

Sewing machines are an excellent investment, just they can be a real pain in the neck to shop. They take up a lot of space, and they are heavy. If you lot have a small flat or don't have enough space to go along all your sewing tools, you might exist looking for a mode to shop your sewing motorcar.

Here is one solution that will allow you lot to store your sewing machine without wasting much infinite. The sewing table insert is a neat solution that will allow y'all to store your sewing car without taking upwardly a lot of space.

In this guide, we'll explicate how to make a sewing tabular array insert in simple steps. You lot tin can use it as a display case or storage for your sewing machine.

7 Steps How to Brand a Sewing Table Insert

This guide walks through making a sewing table insert using a piece of particle board, forest, and chip fabric. If you follow this stride-by-step guide, you lot'll exist able to make a central sewing tabular array insert yourself.

Step 1: Set up the Table

Your first step is to make sure that your tabular array is level. If the table is not level, the material will not stay in place, and y'all'll have difficulty sewing. Next, brand sure that the height of the table is right.

This will depend on how tall or short you are and what kind of chair you're using. You desire to sit comfortably without hunching over too much or straining yourself excessively when reaching for supplies.

Finally, ensure that your sewing infinite is secure and complimentary from obstructions by checking all around its perimeter for anything that could interfere with your work: cords dangling from lamps, wires crossing paths with one another, and and then on; these things tin can cause serious accidents!

Step 2: Gather Tools and Materials

In this step, you'll get together the tools and materials you demand to complete your projection.

• Tools: Measuring tape, pencil, ruler, drill and a clamp (optional), screwdriver or hammer if attaching hardware.
• Materials: Forest (for the base), fabric, and foam for padding.

Step 3: Cut the Hole in the Table

Now you lot're ready to cut your hole in the tabular array. First, lay down some newspaper or something to protect your tabletop from cutting oil or water. Then, place the template on pinnacle and trace it around it with a pencil to see where yous'll be cutting.

Side by side, employ a jigsaw and circular saw (or some other cutting tool) to cut out the hole in the table and ensure information technology'south big enough for your sewing car and any accessories such as a foot pedal or extension cord.

If whatsoever precipitous edges are left over from this process, accept some sandpaper and smooth them down, then no one gets hurt when they sit at their sewing table!

Footstep iv: Brand a Template for the Sewing Machine Insert

You'll need to do ii things to make a template for your sewing machine insert.

• Mensurate the size of your sewing machine's table opening. If you're unsure which one is right, check with your sewing machine manufacturer before proceeding with this step. You can measure diagonally or horizontally beyond the opening, simply don't forget that there are 2 ways to measure out it!
• Cut out an appropriate piece of felt or textile that will fit within the table opening and attach it to some cardboard or other strong material so it will hold its shape when cut into even sections (a separate piece for each section). Then use a pencil or pen to marking where each section needs to be cut out so that they all line up perfectly when sewn together later in step 5 below.

Pace 5: Make Inserts for the Drawers

At present that you have your table insert done, it'southward time to make inserts for the drawers. Just like before, utilize your template and ruler to cut pieces of fabric that will fit into each drawer.

The measurements volition vary depending on how deep or shallow your drawers are, but when in doubt, I'd recommend cut them a bit longer than what you think is necessary, just in case.

So place the textile on pinnacle of one slice of wood from each drawer and apply pencil marks to indicate where it needs to be cut out with a saw (or whatever tool works all-time for this).

Finally, hammer out any dents from cutting with the saw (or tool) and install them!

Pace half dozen: Make a Quilt for the Table Insert

• Make a quilt for the table insert. You lot tin utilize any kind of fabric you similar, but I recommend using something thick and sturdy similar denim or corduroy to avert sagging over time. If y'all don't want to make your ain, check out vintage clothing stores—often, tons of old-fashioned fabrics are available!
• If y'all're new to sewing, start with something simple and inexpensive, like making napkins or pillowcases from fat quarters (or even scraps from other projects). One time those skills are in place, move on to more complicated projects like curtains or pillows. It's also worth looking into classes at local community centers if there aren't any in your area—they commonly teach everything from essential automobile operation to complex designs!
• If none of that sounds appealing only still want a handmade bear on? Bank check out Etsy sellers who specialize in custom workmanship: they'll gladly accept commissions on any material of selection—and for less than what it'd toll otherwise!

Stride 7: Install the Table Insert on Your Sewing Motorcar Table

• Cut the template out of your fabric, leaving a 1/ii inch seam allowance on all sides (yous can use the scraps from earlier steps).
• Identify this piece on the back of your tabular array insert, lining upwards all edges with those on your template. Pin in place so y'all won't lose track of where you started or stopped sewing later.
• Sew forth all edges using 1/4 inch seam assart; remove pins as yous go, just leave them in until later y'all've finished sewing and then that they don't fray and stick to your ironing surface later.

Making a sewing table insert is pretty like shooting fish in a barrel with some unproblematic tools.

Making this sewing table insert is pretty easy with some simple tools. A table saw, or another power tool can cut the pieces, but if you are unfamiliar with operating a ability tool, it's best to use hand tools instead.

Also, ensure that when cutting the pieces, yous wear condom glasses and gloves so that any splinters don't get in your optics or fingers. Information technology's besides essential to have a grit mask around so that when sanding downward the wood before painting, information technology won't get into your lungs.

Finally, wearing hearing protection while using power tools is essential because information technology can be loud enough to impairment your hearing over time without notice!

Conclusion

I promise this guide has helped y'all learn how to brand a sewing table insert. Making a sewing table insert is a great way to have your sewing done more efficiently while, at the same time, you're saving space on your worktable.

Source: https://sewingoverhaul.com/how-to-make-a-sewing-table-insert/

Share this post